50Khz High Frequency Ultrasonic Atomizing Nozzle For Antimicrobial Coatings
50Khz High Frequency Ultrasonic Atomization Nozzle for antimicrobial coatings
Paramater
| Item | Parameter |
| Frequency | 50Khz |
| Power | 10~100w |
| FLOW RATE (ml/min) | 0~20ml/min |
| Spray width | 2~200mm |
| Solution utilization | above 98% |
Description
Ultrasonic nozzle, also known as ultrasonic atomizing nozzle, is an ultrasonic atomizing device based on the principle of horn transducer. It atomizes the liquid through the amplified high-frequency ultrasonic oscillation, and sends the liquid mist to the object to be sprayed or a specific space through a certain amount of carrier gas. With its unique advantages, ultrasonic nozzles are widely used in the fields of nano- and sub-micron functional coating spraying, spray pyrolysis and spray drying. At the same time, ultrasonic spraying also has the advantages of uniform atomization particles, high precision, extremely low air pressure, 4 times the raw material utilization rate, and no clogging.
Ultrasonic atomization is the use of electronic high-frequency oscillation (the oscillation frequency is 1.7MHz or 2.4MHz, which exceeds the range of human hearing, and the electronic oscillation has no harm to humans and animals), through the high-frequency resonance of the ceramic atomizing sheet The molecular bonds between molecules break up to produce a natural and elegant water mist, without heating or adding any chemical reagents.
Compared with the heating atomization method, energy saving is 90%. In addition, a large amount of negative ions will be released during the atomization process, which will react electrostatically with smoke and dust floating in the air to make them precipitate. At the same time, it can effectively remove formaldehyde, carbon monoxide, bacteria and other harmful substances, so that the air can be purified. Reduce the occurrence of diseases.
Features
Large width spraying, spraying width: 40-150mm
Uniform coating: uniformity>95
Saving raw materials: the utilization rate of raw materials is as high as 85%, which is 4 times that of traditional two-fluid spraying
High precision of coating thickness control: It can prepare coatings from 20 nanometers to tens of micrometers, and accurately control the coating thickness
Atomized particles are uniform, which can achieve ultra-low spray flow
Can achieve intermittent or continuous spray
Not easy to block the nozzle
Anti-corrosion sprinkler
Can achieve high precision and high controllability spraying
Application
Spraying in the field of new energy: fuel cells, thin-film solar cells
Spraying in the glass field: anti-reflection AR, hydrophilic and hydrophobic coating, conductive layer, etc.
Spraying in the electronic field: flux, photoresist, conformal paint
Non-woven fabric and textile spraying
Spraying in the biomedical field
Conductive film: conductive films such as carbon nanotubes, graphene, nano silver, etc.
